3
Box content
Corner Protection (1 Piece, height 80 cm, side-length 10cm each side) with 6 drilling
holes like indicated in the picture above
Screws and dowels
are not included
. We recommend to purchase appropriate M6
screws and dowels fitting to the material of the wall (concrete, wood etc.) which
should be equipped with the protection. Alternatively, a strong double-sided
mounting tape (suitable for your surface, like concrete, stone, wood) can be used.
Installation
Step 1: Place the Protection Rubber vertically on the wall, carefully drill through the
indicated Drill-dents, then mark with a pencil through the perforated 6 drilling holes
the position where you want to set dowels and screws into the wall
Step 2: Drill holes at the prepared screw mark positions on the surface/wall and fix
the Corner Protection properly.
