(36)
(34)
(32)
(33)
(29)
(28)
6
7
(27). SLAVE control
When the MASTER/SLAVE (36) switch is depressed, the SLAVE control is used to adjust the volume of signal
supplied on link output socket, if release the MASTER/SLAVE switch, the control will be invalid, the signal came
from LINK IN will be directly sent to LINK OUT.
(25). LINE OUT
Electronically unbalanced 6.3
jacks, designed for sending the signal came from tape, MIC, AUX IN or wireless
receiver to other P series product or amplifier or active speaker. Furthermore, bass/treble and echo controls
have no influence on the LINE OUT socket.
(22). BASS control
Tone control for bass, which is used to boost or attenuate the low frequency by 10dB. When the knob is in the
center position (0 scale), the frequency response is flat.
(23). TREBLE control
Tone control for treble, which is used to boost or attenuate the high frequency by 10dB. When the knob is in the
center position (0 scale), the frequency response is flat.
(24). ECHO control
Rotating this control to adjust the echo level, clockwise for enhancing and counterclockwise for attenuating.
It is valid only for MIC input (included wireless MIC input).
(19). AUX IN
Electronically unbalanced 6.3
jack, designed for the
connection of high level (line) source such as guitar,
CD/DVD etc.
(20). AUX control
Adjusts the volume of signal supplied on AUX input
connector, the adjustable range is from 0 to +10dB.
(21). CD control
Rotating this control to adjust the amount of tape/CD output volume, the adjustable range is from 0 to +10dB.
(19)
(20)
(21)
(22)
(23)
(24)
(25)
(26)
(26). VOICE PRIORITY switch
Press this switch to activate the voice priority function, the signal from microphone will be outputted prior to other
signal source. Release the switch to invalidate the function.
(27)
AUX
IN
LINE
OUT
OFF
MAX
ECHO
0
-
10
+
10
TREBLE
0
-
10
+
10
BASS
5
0
+
10
CD
5
0
+
10
AUX
ON
OFF
VOICE
PRIORITY
AUDIO LINK ACTIVE BUS
MASTER
SLAVE
5
0
+
10
SLAVE
IN
OUT
1
2
3
1
2
3
(28). LINK IN socket
Electronically balanced XLR input connector, serve to connect the external signal source such as DVD/VCD, CD,
or another PA system, etc.
(29). LINK OUT socket
Electronically balanced XLR output connector, output the signal came from LINK IN to another PA system or amplifier
system or active speaker.
(34). POWER LED
This LED lights up when the power switch is turned on.
(35). BAT LOW LED
This LED illumines when the battery power is low, this means the battery need to be recharged up.
(36). RECHARGING LED
This LED twinkles when the battery is being recharged. After the battery is recharged, this LED keeps lighting up.
(33). DC IN socket
The unit provides the DC IN socket, which is used to connect ex12Vbattery or other DC source.
3.6 Power supply and speaker output section
(30). POWER switch
Turns this apparatus on or off.
(31). Fuse holder
The fuse holder is for containing the fuse, which is a safety device that protects the AC supplies circuits of this
apparatus.
Caution:
If the fuse blew out, it should be replaced with the same type and specification; if the fuse continues
to blow out, please stop using and refer servicing to qualified personnel.
(32). AC power socket
This socket is used to connect the power supply to the unit via enclosed power cord.
Caution:
Ensure the source voltage matches for the voltage of product before turning on the unit.
(30)
(31)
(35)
1
2
3
1
2
3
1
2
3
1
2
3
(17). MIC input
Electronically balanced XLR and unbalanced 6.3
connectors, which are designed for the connection of low
level signal sources such as low impedance microphones.
(18). MIC control
Adjusts the volume of signal supplied on MIC input connectors, the adjustable range is from 0 to +10dB.
(17)
(18)
BAL
UNBAL
MIC 1
BAL
UNBAL
MIC 2
5
0
+
10
5
0
+
10
1
2
3
1
2
3
Содержание PA system
Страница 1: ......
