Kirisun UP305, Краткое руководство пользователя

Страница: 5 / 10

NO. Function Description
3 Monitoring
If CTCSS is enabled on the current analog channel, press the key to switch to
carrier squelch mode (i.e. cancel CTCSS), and the radio outputs voice if
carriers are matched.
4 Emergency Alarm Send an emergency alarm.
5
Exit Emergency
Alarm
Quit emergency alarm state.
6 Squelch On/Off
Enable/disable squelch. You may enable this function to receive week signals
on an analog channel.
7
Battery Level
Indication
Press the key to announce the battery level.
8 Scan Enable/disable scan. Listen to the communication on other channels.
9 Alert Tone On/Off Enable/disable alert tones.
10 Zone Selection Switch to another zone. Zones are programmed using the CPS.
11 Repeater/Talk Around Enable/disable repeater function for the channel.
12 Nuisance Delete Press the key to delete an unwanted channel from the scan list.
13 Broadcast Call Make a broadcast call.
LED Indicator
Indicator State Device State
Red Light on Transmission in progress.
Green Light on Reception in progress.
Red Light Flashing Low battery. Charging is required.
Green Light Flashing Scan in progress.
Yellow Light Flashing In call hold state in digital mode. Exit when hold time is up.
Yellow Light on The channel is not configured. Switch to another channel.
Icons (UP405S only)
Icon Description
Current channel. (16 channels in total)
Volume level. (14 levels in total)
Mute state.
Low-battery alarm. (Remaining capacity <
5%)
Remaining battery capacity. (High, medium
or low)
The zone of the current channel. (16 zones
in total)
Calling in progress.
Troubleshooting
No. Problem Reason and Solution
1 Power-on failure
1. Battery out
Solution: Charge or replace the battery.
2. Faulty volume switch
Solution: Get it repaired at the authorized service
station.
2 Low voice during call 1. Speak too far from the microphone