Kirisun PT8100, Инструкция по эксплуатации

Страница: 8 / 15

7 8
Buttons Function Description
11.Key lock
12.Scan
13.Nuisance
Delete
14. Public
Address
4
．
Programmable Button Function
/
， ， ， ，
can be programmed as one of the auxiliary
functions.
0.None No function
1.Channel Up Select the next channel
2.Channel Down Select the previous channel
3.Zone Up Select the next zone
4.Zone Down Select the previous zone
5.Display Channel
Frequency
6.Display Channel
Name
7.Display Mode
Switch
8.OST
9.Power level
Selection
10.Squelch Level
Selection
Buttons Function Description
Press this button and the LCD will show the
frequency of the current channel.
Press this button and the LCD will show the
name of the current channel.
Press this button and the LCD will show
“
Channel
Number
”
,
“
Channel Name
”
,
“
Zone Number,
Zone Name
”
and
“
Channel Frequency
”
alternately.
Press this button to make selection among the
high, medium and low transmission power, and
“
H
”
,
“
M
”
and
“
L
”
will be shown on the LCD
to represent the current transmission power.
Change the setup of preset CTCSS/DCS for the
current channel.
button to adjust the level. Press the button
to save the selected squelch level and quit this
mode.
When one channel continually generated unwanted
noise.this allow you temporary remove the channel
from the current active scan.
To toggle between locking/unlocking your radio
’
keypad.
Start/end the scanning function of system.
Start/end the public address function.
Press this button and the function will be actived.
P
1
P
2
P
3
Press this button to enter the
“
Squelch Level
Adjustment Mode
”
first, and then press the /
10.Squelch Level
Selection
Press the PTT button and speak to the microphone
so that you can hear your voice through the external
speaker . Press this button once again and return
to the normal user mode.
15.Home Channel
16.Talkaround
17. Monitor
momentary/
Call Cancel
Changes to the home channels.
Switch the radio between talkaround and repeater
mode.
Press this button, CTCSS, DCS, 2Tone/DTMF
signaling will be closed as setting, release it to
return to the normal operation.