Kirisun PT6200, Инструкция по эксплуатации

Страница: 9 / 10

2) The charger will stop charging and the indicator turns yellow
if the charger detects the battery is damaged
or if the temperature of the battery is too high (higher
than 50 for Ni- MH battery or 40 for Li- ion battery).
3) Do not charge the battery longer than the specif ied
time.
And do not charge the battery again if it is
charged fully, otherwise, its life will be
shortene d or it will be damaged.
3.2 Installing the Antenna
Screw the antenna into
the connector at the top
of the transceive r b y
holding the bottom of
the antenna and turn it
clockwise until secure.
3 Accessories
3.1 Installing/Removing the Battery Pack
To install the battery pack:
1) M a t c h t h e 3 bulges
of t h e b a t t e r y p a c k
w i t h t h e c o r r e s p o n d i n g
holes at t h e r e a r b o t t o m of t h e
t r a n s c e i v e r ;
2) T h e n firmly p r e s s t h e
battery pack d o w n w a r d s t o
l o c k it i n p l a c e until a click i s
heard.
To remove the battery pack:
1) Use your thumb to press the
belt clip, and one side o f your
index finger to press the
release button;
2) And then pull the battery
away from the transceiver.
3.3 Installing the Belt Clip
Match the grooves of the
belt clip with those on the rear of
the battery. Then press the belt
clip downwards to lock it in place.
3.4 Installing the Dust Cover over
the Versatile Connector
When not using the
optional
Speaker/Microphone,
install the dus t c o v er o v er
the versatile connector with the
supplied screw.