10
9
Individual Working
Press the side button set as
Individual Working
to enter
individual working mode, which ensures the user's security when
the radio is in individual working.
Notice: Individual Working is relevant with the auto checking mode
in the programming software and activated only when the both
functions have been set.
Monitor
Press the side button set as
Monitor
to turn off QT, DQT, 2-Tone
and 5-Tone and to hear the signals that cannot be heard when in
normal work. Press the Monitor key again to return to normal work.
Instantaneously Monitor
Press the side button set as
Instantaneously Monitor
to turn off
QT, DQT,2-Tone and 5-Tone and release it to return to normal work.
Temporarily Cancel Noise Channel
When the radio pauses on a certain channel during scanning, press
the button set as
Instantaneously Cancel Noise Channel
to
delete this channel from the scanning list temporarily.
Cancel Noise Channel
When the radio pauses on a certain channel during scanning, press
the button set as
Cancel Noise Channel
to delete this channel
from the scanning list permanently. The radio won't scan this
channel again after turning on the radio or it exits scanning.
Check Squelch Level
Press and hold the button set as
Check Squelch Level
to hear
the squelch level annunciation of the current channel.
Adjustable Squelch
Press the button set as
Adjustable Squelch
to change squelch
level. Press once to increase one level (cycle of 9-0; when at level
0 a beep sounds and squelch is activated) and store the change.
Scan
A) Press the button set as
Scan
to start scanning. When in
scanning, the radio checks signals on each channel; it stops
scanning and pauses on the channel on which signals are
detected until the signals disappear. If a delay time has been set
between the interval of signal disappearing and scanning
restarting, the radio will keep staying on that channel if it receives
any signals during the delay time.
B) The working channel of the radio will revert to the following
channels automatically when you press PTT button during
scanning. The dealer can select one among the following six
options.:
1) Selected channel
When pressing PTT button, the radio will transmit from the first
channel in the scanning list.
2) Selected c currently working channel
When pressing PTT button during scanning, the radio will always
transmit from the first channel in the scanning list. When pressing
PTT button during the scanning pause, the radio will always
transmit from the currently working channel
3) Priority channel
The radio will transmit from the priority channel in the scanning
list when you press PTT button.
4) Priority c currently working channel
When pressing PTT button during scanning, the radio will always
transmit from the priority channel. When pressing PTT button
