background image

  ITEM                                   QUANTITY

1

1

1

1

1

1

1

UNPACKING AND CHECKING EQUIPMENT

  Carefully unpack the radio. We recommend that you 
identify the items listed in the following table before dis-carding the 
packing material. If any damage has occurred during shipment,  
please contact the dealer  immediately .

SUPPLIED ACCESSORIES 

Hand strap

Belt clip

Li-ion battery pack 

Charger 

Power adapter

Instruction manual 

Belt clip

Charger

Battery

Antenna

2

Antenna

PREPARATION 

CHARGING THE BATTERY PACK 

*

*

Notice:

A new battery or a battery whose power appears 
low (power indicator displays one bar or no bar) 
needs charging before using.

     The battery is not fully charged in the factory, and probably the 
new battery is falsely indicated as full charge. Before the initial use, 
please charge the new battery. 
       Kirisun KB-58L Li-ion battery is supplied. 
      When charge the battery for the first time after purchase or long-
time storage (over 2 months), please repeat charging several times to 

1)

Plug the adapter into an AC wall outlet; 

connect the power adapter with the battery 
charger, and then the indicator lights yellow.
2)

Place the battery or radio into the charger 

slot. Make sure the battery is well connected 
with the charger. The indicator turns red, and 
then the charger gets in the state of charging 
automatically. Charging time is about 5 hours. 
When battery is fully charged the indicator turns 
green.
While in green light state, keep the battery 
remain in the charger for 1~2 hours, which will 
give you the best battery performance. And then 
disconnect the adapter from the AC outlet.

*

1

Hand Strap

Power Adapter

Содержание PT4200













Отзывы: