3. Getting Acquainted
(1)Exterior figure
LED Indicator: LED Lights red while transmitting; lights
green while receiving a signal; flashes red when the battery
voltage is low; lights orange while turning on the radio.
Channel Selector: Rotate to select channel 1-15.and CH16 is
scanning channel
Power/Volume Switch: Turn clockwise to switch ON the
t r a n s c e i v e r ; t o s w i t c h O F F t h e t r a n s c e i v e r, t u r n
counterclockwise until a click sounds; rotate to adjust the
volume level.
PTT (Push-to-Talk): To make a call, press and hold the PTT
button, then speak into the microphone with normal voice.
Release the PTT to receive.
Monitor Button: Press the button for closing the SQUELCH,
and release for open
Function key: press this key about 1 second, the transceiver
will emit alert with high decibel, press again stop the alert
MIC-SP JACKS: If desired, connect a speaker microphone or
ear piece here.
A
B
C
D
E
F
G
4. Basic Operation
Switch on
Switch on the transceiver by turning the
Power /Volume control clockwise till a click is
heard, then the transceiver will be in the state
of stand by time, and the orange LED light
flashes once and disappears.
Adjust the Volume
To increase volumes rotate the Power/Volume
Control knob clockwise.
Select the Channel
Rotate the Channel selector to select your
desired channel. If setting the channel selector
to CH16 will scan automatic
PTT Button
To make a call, press and hold the PTT button
then speak into the microphone in your normal
speaking voice.
Note: Please keep your mouth away from
microphone 3cm-8cm.
