FP460 Digital Two-way Radio Instruction Manual
22
the scan list and stops on the channel which a signal is detected.
During scan, the radio checks and stops on a busy channel. Then the radio continues scanning until
the channel is not busy for a while (this time is set by dealer, which is named as Scan Hold Time).
Steps to start scanning: press the Scan shortcut key
select “Start” item. The radio scans the
channels in the current scanning list one by one. During scan, press the Cancel key or scan shortcut
key to stop.
Scan revert channel
During scan, press the PTT key to make the radio transmit on a default channel. The channel can be
programmed by your dealer.
5.7
Messages:
Enter “Messages” menu, you can edit, send, receive, reply, forward and delete the message.
5.8
Shortcut Messages:
Enter “Messages
Shortcut Message
” menu, you can edit, send, receive, reply, forward and delete
the shortcut message. The content of shortcut messages is set by local dealers.
Users can use
these functions under the menu prompt.
5.9
Setting operating parameters
