DP405 Digital Two-way Radio
User Manual
III
Federal Communications Commission Regulations
Before it was marketed in the United States, the Digital portable radio was tested to ensure compliance with FCC
RF energy exposure limits for two-way portable radios. When two-way radios are used as a consequence of
employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational
requirements. Exposure awareness can be facilitated by the use of a label directing users to specific user
awareness information. The radio has an RF exposure product label.Also, the Product Safety Manual and this
Operator
’s Manual include information and operating instructions required to control RF exposure and to satisfy
compliance requirements.
Operation Safety Recommendations
Occupational Safety Guidelines And Safety Training Information
To ensure bodily exposure to RF electromagnetic energy is within the FCC allowable limits for occupational use.
Always adhere to the following basic guidelines:
•
The push-to-talk button should only be depressed when intending to send a voice message.
•
The radio should only be used for necessary work-related communications.
•
The radio should only be used by authorized and trained personnel. It should never be operated by children.
•
Do not attempt any unauthorized modification to the radio. Changes or modifications to the radio may cause
harmful interference and/or cause it to exceed FCC RF exposure limits. Only qualified personnel should
service the radio.
•
Always use only authorized accessories (antennas, control heads, speakers/mics, etc.). Use of unauthorized
accessories can cause the FCC RF exposure compliance requirements to be exceeded.
The information listed above provides the user with information needed to make him or her aware of a RF
exposure, and what to do to assure that this radio operates within the FCC exposure limits of this radio.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this
device does not cause harmful interference.
