KIRAMI MACU, Инструкция по эксплуатации

Страница: 22 / 60

© Kirami Oy, Finland
Page 5
User manual: Kirami MACU Hot tub heater
Chimney
You can use a Ø150mm outer diameter acid-proof chimney
with this heater. The reduced end of the chimney fits inside
the heater. The chimney parts can be purchased separately in
three different lengths: 25 cm, 50 cm and 100 cm. There are
also available adjustable chimney corners and 100 cm long
protective sleeves for the lower part of the chimney.
We recommend a chimney kit for the heater. This package
includes 200 cm c 100cm protective sleeve and a
standard hat. There are also spark protective hats available for
the chimney.
If you have purchased a chimney kit with the heater. It is supplied in a separate box and has four
parts (see picture right) and it has to be assembled.
Remove the protective film from the thermal protection and place the assembled chimney to the
chimney outlet of the stove.
Be careful, the edges of the chimney are very sharp. Use protective gloves!
Magnesium anode rod
Magnesium will work as anode, meaning that magnesium will corrode before
heater’s aluminium does.
The mangesium rod should be replaced annually or after it has been
depleted. If the rod hasn’t been changed on time the heater won’t have
guarantee left.
Replacement instructions are on the replacement rod package.
NB! Before heating up check that the thread is waterproof. If water is
leaking through the thread then fasten it more and check that o-ring is in
place.
22/60
23.08.2018