SCIBORG
®
SL70VG GUIDE
4
1. The SL70VG reads the vehicle speed by CAN bus, so the auto lock
speed may differ very slightly from what you see on your speedom-
eter. This is normal and nothing to worry about.
2. In some rare cases, noise may temporarily appear on an in-dash
TV while door lock motors are working. That noise is from the door
lock motors and is not an indication of problems with the SL70VG.
3. You cannot install the SL70VG on vehicles with manual (stick
shift) transmissions.
4. KIRAMEK is not liable for traffic accidents, thefts, or acts of God
even if the SL70VG is installed in your car.
5. The SL70VG can be used with all DIGI-LINK CAN products from
KIRAMEK, like the 1480 car security system. We cannot guaran-
tee properly operation of the SL70VG when used along side other
company’s CAN products, however, because there are OBD and
CAN products that are not designed well and cause signal interfer-
ence with our and other 3rd party products.
6. Product features and specifications subject to change without
notice.
INSTAL L ATION
PLEASE NOTE
VERIFY
4.
Close all doors and then either turn on the Ignition or start the engine. While stepping
on the Brake, move the gear into the R or D positions and lock the doors by pressing the
door lock switch inside your car. Return the gear to the P position and confirm the doors
automatically unlock. The auto-unlock confirms the SL70VG is functioning properly. If
doors do not unlock, press the Reset switch on the Control Module in accordance with
Step-3 instructions.
