![Kipp & Zonen PAR lite Скачать руководство пользователя страница 23](http://html1.mh-extra.com/html/kipp-and-zonen/par-lite/par-lite_instruction-manual_1971783023.webp)
INSTALLATION AND MANTENANCE
Instruction manual PAR-LITE
20
4
Installation and maintenance
When installed permanently, the PAR
LITE
can be attached to
its mounting platform using the holes that are drilled through
the body. The holes are standardised to Kipp & Zonen design.
Leveling can be done with a level instrument over the
rim/diffuser.
Preferred orientation is with the cable pointing away from the
equator (this prevents excessive heating of the leads). When
installed on a mast, preferred orientation is such that no
shadow is cast on the PAR
LITE
during any time of the day.
On the northern hemisphere this implies that the PAR
LITE
should be south of the mast.
The PAR
LITE
can be used to measure reflected radiation, for
instance when pointed towards the earth in the inverted
position. When measuring reflected radiation it is advised to
measure at a height H of at least 1.5 meters above the surface
in order to avoid shading effects and to promote spatial
averaging. (99% of the signal is from a field with radius 10.H)
The PAR
LITE
is an all weather instrument.
Once installed the PAR
LITE
needs little maintenance. It is
suggested to clean the detector as part of a regular routine,
using water or alcohol.
Содержание PAR lite
