Kipor KGE2400X, Руководство по эксплуатации

Страница: 17 / 28

11
5.4 DC Charge Function
The DC receptacle is to be used for charging automotive and marine batteries only. Any other use such
as operating DC motors may cause irreparable alternator damage and is prohibited.
1. Connect the charging cable to the DC receptacle of the generator and then to the battery terminals.
Use only the charging cable supplied with the generator.
■ To prevent the possibility of creating sparks near the battery, connect the
charging cable first to the generator then to the battery. Disconnect the
cable first at the battery.
■ Before connecting the charging cable to a battery that is installed in a
vehicle, disconnect the vehicle's battery ground cable. Reconnect the
vehicle's ground cable after the charging cables are removed. This
procedure will prevent the possibility of a short circuit and sparks if
accidental contact is made between a battery terminal and the vehicle's
frame or body.
■ Do not attempt to start an automobile engine with the generator still
connected to battery. The generator may be damaged.
■ Connect the positive battery terminal to the positive charging cord. Do
not reverse the charging cables or serious damage to the generator
and/or battery may occur.
■ The battery gives off explosive gases: keep sparks, flames and
cigarettes away. Provide adequate ventilation when charging.
■ The battery contains sulfuric acid (electrolyte). Contact with skin or eyes
may cause severe burns. Wear protective clothing and a face shield.
A. If electrolyte gets on your skin, flush with water.
B. If electrolytes gets in your eyes, flush with water for at least 15
minutes and call a physician.
■ Electrolyte is poisonous.
If swallowed, drink large quantities of water or milk and follow with milk
of magnesia or vegetable oil and call a physician.
■ Keep out of reach of children.
The DC output is to be used to charge batteries only. Serious damage
to the stator windings can occur if connected to a DC motor or
transformer.