Chapter 1 Before Use
1-9
1. 5 Appearance
1. 5. 1 Front view
No. Name
Function
1
Main Switch
You can turn on/off the KIP 700m.
2
Original Guides
Feed the original under the Scanner Unit along the Original
Guides.
3
User Interface
This is a Touch Screen, and many kinds of user operation are
available.
PLEASE DO NOT
push the LCD area too strong.
4
Emergent Stop Button
Press this red button when you would like to stop copying or
scanning emergently.
5
Scanner Unit
Read the original with this unit when you make scan or copy.
6
Original Table
Place the original here and then feed it into the Scanner Unit
when you make scan or copy.
7
Engine Unit Open Lever Push down these blue levers when you open the Engine Unit.
8
Bypass Feeder
Feed a cut sheet paper from the Bypass Feeder.
Open here to access Initial Cut Button.
9
Roll Deck Cover
Lift up to open the Roll Deck.
A roll media can be loaded in the Roll Deck.
10 Print Basket
Receives ejected printed.
11 Stylus
Use this to press buttons on the touch screen.
PLEASE DO NOT
use any other pointed object to tap on the UI.
12 Print Exit Cover
Can access a mis-feed print inside the Fuser Unit.
13 Initial Cut Button
Push this button to trim the leading edge of the loaded roll
media.
14 USB port
Your USB flash memory storage can be installed here.
5VDC max.
3
5
7
12
1
9
7
10
11
7
7
2
2
8
4
12
14
6
13
