Kioti NX4520 Скачать руководство пользователя страница 133

Страница: 133 / 262

description of operating systeM

t46w031a

TREAD

(1) bolt

(2) rim bolt (3) disc

When working on a field where crops

are linearly aligned, the tread should

be adjusted so that the tires do not

cross over the crops.
it is also necessary to widen wheel

tread to decrease danger when work-

ing on slopes or hills, or when doing

trailer work, etc.

Do not weld or apply heat to

the tire rim or disc. The tire

can explode due to the rapidly

increased pressure in the tire.

Check tires for inflation pres

sure, damage, deformation,

and extended wear on lug and

damage of rim and disc. Also

check if wheel bolts, rim bolts,

and nuts are loose.

•

WARNING

Never operate tractor with a

loose rim, wheel, or axle.

Always tighten nuts or bolts

to the specified torque.

Make sure to frequently check

that all these parts are firmly

tightened. Make sure to per-

form inspection daily.

•
•

WARNING

TE1O4d1A

TE130(NX4520,5020,5520,6020)-합본-67 67

2016-02-22 오전 8:24:21

Содержание NX4520







































































































































































































































































Результаты поиска

Содержание NX4520

Отзывы:

Бренды по названию

Популярные бренды

Kioti NX4520, Руководство пользователя

Результаты поиска

Содержание NX4520

Отзывы:

Бренды по названию

Популярные бренды