Kioti DK35SE, Руководство пользователя

Страница: 30 / 32

9
-30
DT66-W00 Jan. 2007
DK35/40/45/50SE
SAFETY FIRST
G
EN
ER
A
L
EN
G
IN
E
CL
U
TC
H
TRANSMISSION
H
ST
RE
A
R
A
X
LE
BR
A
KE
FR
O
N
T
A
X
LE
H
YD
RA
U
LI
C
EL
EC
TR
IC
ST
EE
RI
N
G
(1) O-ring (2) Spacer
Install a new O-ring (1) in the housing and position
the spacer (2) on the O-ring so that the holes are
aligned with the holes in housing.
12.
(1) Pin (3) Steering port side
(2) Spacer
(1) Motor (3) Seal
(2) O-ring (4) O-ring
T46W945A
T46W946A
Position the spool and sleeve so that the pin (1) is
parallel with the steering port face (3) of the steer -
ing motor housing.
13.
T46W948A
T46W947A
Insert the drive shaft (1) into the motor so that its
slotted end engages with the pin in the spool and
sleeve. Mark a line (2 places) on the face of the
drive shaft so that the pin is parallel with the port
face of the steering motor housing (3).
Coat a new O-ring (2) and seal ring (3) with clean
hydraulic fluid and install them on the rotor (1).
Install a new O-ring (4) in the groove of the stator,
and then fit the rotor and stator together so that
their O-rings are on opposite sides.
14.
15.
The orientation of the rotor and stator on the
drive shaft will determine valve timing in the
steering motor. These parts must be installed as
described. •
CaUTIOn
STEERING SYSTEM - SERvICING
M32_EN_A4.indb 30 2007-02-02 오전 10:45:32