Kioti DK 651, Руководство пользователя

Страница: 106 / 125

MAINTENANCE 6-21
ADJUSTING PROCEDURE
1. Loosen the lock nut and turn the turn-
buckle to adjust the rod length until the
proper toe-in measurement is obtained.
2. Retighten the lock nut.
C86O630A
(1) Tie-Rod (2) Lock Nut
CHECKING POWER STEERING LINE
C86O628A
1. Check to see that all hydraulic lines
a n d h o s e c l a m p s a r e t i g h t a n d
undamaged.
2. If damage is found you should replace
the hose or clamp at once.
(1) Power Steering
C86O629A
(A) Wheel - to - wheel distance at rear
(B) Wheel - to - wheel distance at front
1. Park tractor on a flat surface.
2. T u r n t h e s t e e r i n g w h e e l s o f r o n t
w h e e l s a r e i n t h e s t r a i g h t a h e a d
position.
3. Lower the implement, lock the park
brake and stop the engine.
4. Measure the distance between tire
beads at front of tire, hub height.
5. Measure the distance between tire
beads at rear of tire, hub height.
6. The front distance should be 2 to 8
mm less than rear distance. If not, ad-
just the tie rod length.
ADJUSTING TOE-IN