DeerTV- Kinytech
COPYRIGHT © www.deertv.com
| DeerTV Protection Enclosure Company. All rights reserved
Assembly together.
1.
Connect all cables: AC cable, the USB cooling fan cable connected to the TV USB port. Mount TV on the rear enclosure.
2.
Adjust the TV position horizontally to center the TV. Mount the front enclosure to the rear enclosure.
Very Important: Please put the front Enclosure pass through TV first (No Angle) then adjust the angle to mount the
rear enclosure if your TV is big enough.
// If there is a deviation during assembly, you may need to slowly combine the front enclosure and rear enclosure together. //
3.
Use thumb screws to fix the front enclosure and the rear enclosure. There are 3 thumb screws in total, and you must
install at least 1pcs thumb screw.
// If there is a deviation during assembly, you may need to slowly screw it together. //
