Kinwei PC7810ME, Руководство пользователя

Страница: 52 / 54

The installation interface is shown below:
You can also click on Cancel to exit the installation.
4) Reboot: When the smart device is dead, you can restart it
by click on
5) Recovery: the device can enter Recovery mode by clicking on. If the device
doesn’t support Recovery mode, it will directly go to Android mode after restart.
9. Troubleshooting and FAQ
1. Device doesn’t turn on
1) You cannot turn on the device when the battery charge is below the critical level, please charge the
battery.
2) Press the RESET button on the top of the device and check if it is restarting normally or not.
3) Check if the charger is connected correctly.
2
．
The stand-by time of the device is too short
1) The duration of the lithium battery varies with environmental temperature changes and the service
conditions. If the environment temperature is too low or too high, the duration of the battery will be
affected. It is recommended to use this device at normal temperature.
2) Battery life is dependent on usage. High volume, WIFI, and the frequent use may cause the battery
to be drained at a higher rate.