KINSHOFER Auger Torque T150, Руководство оператора, Страница: 14 / 32

www.augertorque.com
14 14
SPECIFICATION
Oil Flow Limitations
The Hedge Trimmer attachment requires an
absolute minimum of 30 LPM to the attachment
at all times to cut a maximum of 25mm diameter
foliage. Increase the oil flow accordingly to
effectively cut up to 40 mm diameter foliage.
When used with the optional 1 metre Extension, the
Hedge Trimmer attachment requires an absolute
minimum of 45 LPM .
The minimum hydraulic flow rate needs to be delivered to the attachment regardless of whether
the carrier machine is stationary or tracking . When tracking, most excavators take flow from the
attachment line and prioritise it to the tracking function . If this results in the attachment line receiving
less than the minimum flow rate required, the hedge trimmer will not operate efficiently .
With a lot of excavators, the slewing function does not starve the hydraulic flow to the attachment line
to the same severity as the tracking function, which means the operator can use the hedge trimmer
effectively by slewing to cut then moving the tracks, stopping and slewing to cut again, repeating this
process to complete the task .
T150 TECHNICAL INFORMATION 50cc Motor 80cc Motor 100cc Motor
CARRIER WEIGHT
1 .5 - 2 .5T
Excavators
Skid Steer Loaders
2 .5 - 4 .5T
Excavators
Skid Steer Loaders
4 .5 - 8 .0T
Excavators
Skid Steer Loaders
BLADE LENGTH 1500 mm 1500 mm 1500 mm
MAXIMUM CUTTING THICKNESS 25mm 40mm 40mm
OIL PRESSURE RANGE 150 - 220 Bar 150 - 220 Bar 150 - 220 Bar
OIL FLOW RANGE 30 - 48 lpm 40 - 68 lpm 50 - 71 lpm
UNIT HEIGHT 292mm 292mm 292mm
UNIT WIDTH 1537mm 1537mm 1537mm
UNIT DEPTH 357mm 357mm 357mm
UNIT WEIGHT 69kg 69kg 69kg
EXTENSION INFORMATION Not suitable 3 .5T/45LPM and above
BLADE LENGTH - 1000mm
UNIT HEIGHT - 120mm
UNIT WIDTH - 1058mm
UNIT DEPTH - 217mm
UNIT WEIGHT - 26kg
100Kg