Kinova 0540 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 35

Kinova 0540 Скачать руководство пользователя страница 15

KINOVA® Dynamic Arm Support O540 Installation Guide

15

Wheelchair mounting configuration options

This section describes the options for configuring the wheelchair mounting of the arm

support.

Configurable elements

The wheelchair mounting setup for the arm support has several elements that can be configured
to more precisely adjust the height of the support for people with different heights. There are
three elements of the mounting kit that can be adjusted:

• Mounting brackets - the mounting brackets can be installed in one of two configurations -

brackets low, so that the mounting arm is lowered with respect to the wheelchair mounting rail,
or brackets high, with the brackets turned around so that the brackets raise the mounting arm.

• Mounting arm bar - the mounting arm can be installed in one of two configurations - bar high,

with the mounting arm turned so that the bar is close to the top of the mounting structure, or
bar low, with the mounting arm turned around with the top of the mounting structure raised
above the bar.

• Mounting plate support - the mounting plate support can either be installed with the mounting

plate up (support up) or upside down, with the mounting plate down (support down)

By configuring these items, eight different height configurations are possible.

Bar high

Bar low

Brackets low

Brackets high

Support

up

Support

down

Figure 3: Mounting configuration options

More details are available in the product installer training.

«
...
13
14
15
16
17
...
»

Содержание 0540




































Отзывы:

Нет отзывов