Kino Flo Kamio 6, Руководство по эксплуатации, Страница: 7 / 12

Warning! To Ensure Proper Operation
ALWAYS TURN OFF THE BALLAST BEFORE connecting or disconnecting lamps,
harnesses or Head Extension Cables. Maximum distance, 50ft ( 2 x 25ft cables ).
Ballast Operation
The Kamio Ballast , BAL-141X operates remote from the fixture. Connect the Kamio lamp
harness to the extension cable or the Ballast, making sure to rotate the locking ring until it
clicks into the locked position. After the lamps are properly installed, the Ballast can be turned
on. Avoid operating in temperatures above 125
°
F (51
°
C).
(Note: The dimmer should be full up when striking the lamp. Once the lamp has come up to full
temperature, in 3-5 minutes, then dim to the desired light level.)
It is normal for the lamp to take 1-2 seconds to ignite. In cold temperatures the Ballast may
take longer to ignite the lamp. If it does not ignite within 5 seconds, switch the ballast to OFF,
and try again. If lamp does not strike after 2 or 3 attempts, turn Ballast off, check that the
harness or any extension connections are secure and restrike.
CAUTION: For AC operation use the PWS-136/X4 universal power supply. Do
Not operate Camera and Kamio off a Camera Battery Charger. The combined
load exceeds the Charger’s capacity and will result in the Charger failing.
C D B A
SIDE VIEW
END VIEW
7
A) Power Input: Connects to 12VDC power cable.
B) Lamp Output: Connects to lamp Harness cable.
C) Power Switch: Lights up green when power is applied. On/off
power switch.
D) Dimmer Control: Adjusts light level of the Lamp.