7
Mounting the Controller
Extension Cable
Insert the 4 rubber feet of the controller into the
4 holes in the fixture.
Secure the Controller to the fixture with the Velcro
fastening strap.
Connect the harness to the Controller. Align the
key ways on the harness connector with the circular
receptacle on the ballast. Rotate the silver locking
ring until it clicks into the lock position.
The FreeStyle LED fixture can be used with the
controller directly attached or remotely, using a
25ft extension cable. Remote operation of the
controller provides more rigging options.
To insert the cable, align the key ways on the
extension cable with the circular receptacle on the
controller. Rotate the silver locking ring until it clicks
into the lock position.
Mount Options
The Controller can be
mounted to a stand with a
ballast mount accessory,
MTP-BAL
and mafer clamp.
MTP-BAL
