BTR200 HD Bluetooth Audio Receiver
13
Factory Reset
WARNING:
Performing a factory reset on the Kinivo BTR200 will delete any
previous pairings and will restore the receiver to factory default settings.
Only perform this if you are experiencing any issues with the product.
1. Power on the Kinivo BTR200 receiver. If it connects to a device, disconnect
the Kinivo BTR200 from your device.
2. Press and hold the Connect button for about 10 seconds. When the reset
is complete, you will see a solid red LED. If this device is connected to a
speaker, you will also hear two tones.
Note:
After factory reset, you will need to remove the previous Kinivo BTR200
pairing from your Bluetooth device(s) and repeat the pairing process.
Dimensions
L x W x H: 79.4mm X 76.2mm X 22.2mm
Color
Black
Connections
3.5mm stereo line-out
Digital audio “Toslink” line-out
Micro USB charging port
