2.
APP download and connection
1. Please scan the QR code below to download APP
It is recommended to use a browser to scan and download. Currently, WeChat scan
download is not supported. Please give the corresponding permissions of this software in
the download and installation process for BT connection.
The APP name is “Da Fit”.
( Da Fit
QR code)
Notes:
1. For Apple phone users: If it is in standby or hibernation state for a long time (for example,
2 hours or more) on Apple phone, (the phone has not been using, and it is in a black screen
state), Da Fit will be cleaned up by IOS system, then the APP application and watch
disconnect in between, the functions on APP are not available to use. Please re-open the
watch and it will be automatically reconnected.
2. For Android phone users: After installing the APP software on the Android phone, you
need to enable the background application launch permission in the settings of your phone.
Each smart phone has a difference. Take Huawei phone as an example. The steps are as
follows:
Settings--Application--Application Launch Management-- Da Fit, find the APP application,
change the automatic management to manual management, open all permissions (allow
Auto-launch,Secondary launch, Run in background). This is only for the APP application to
maintain the Bluetooth connection with the watch while the phone is in standby (the phone
does not have a bright screen), and will not be cleaned up by the Android system. Will not
use network traffic in the background, nor does it affect the power consumption of the
phone.
