10. Set DTMF or Pulse Mode
After set up the PAUSE TIME, press DEL/SET to access the DTMF or PULSE
MODE setup. Press CLID or to select the mode(DTMF or PULSE) and press
DEL/SET to confirm.
1. Set the Language
In on-hook status, press and hold DEL/SET for 3 seconds to enter LANGUAGE
SETUP. Press CLID or to select the language. Press DEL/SET to confirm.
2. Set the Contrast
After set up the LANGUAGE, press DEL/SET to access LCD CONTRAST setup.
LCD display SETTING CONTRAST. Press CLID or to select the contrast
(1-5). Press DEL/SET to confirm.
3. Set Year, Date and Time
After set up the LCD CONTRAST, press DEL/SET to access the YEAR, DATE and
TIME setup. The digits of the year will flash. Press CLID or to select the
year. Press DEL/SET to confirm. Then digits of the month will flash. Press
CLID or to select the month and press DEL/SET to confirm. Use the same
method to set up the date and time.
4. Set Local Code
After set up the YEAR, DATE and TIME, press DEL/SET to access the LOCAL
AREA CODE setup, and the first of five codes will flash. Press CLID or to select
the digit and press DEL/SET to confirm. Use the same method to set up the other
codes. If you set up an area code, ex. 248-1234567, when you receive a telephone
number from this area code 248, Caller ID will show 1234567 only.
5. Set Prefix Code
After set up the LOCAL CODE, the first of three codes will flash. Press CLID or
to select the digit and press DEL/SET to save selection. Use the same method to
continue setting each code.
6. Set the Ring Melodies
After set up the PREFIX CODE, press DEL/SET to access the RING MELODIES
setup. Press CLID or to select the music(1-16) and press DEL/SET to confirm.
7. Set the Ring Volume
After set up the RING MELODIES, press DEL/SET to access the RING VOLUME
setup. Press CLID or to select the ring volume(1-8) and press DEL/SET to
confirm.
8. Set Flash Time
After set up the RING VOLUME, press DEL/SET to enter the FLASH TIME
setup. Press CLID or to select the flash time(100ms, 200ms, 300ms, 400ms,
600ms, 900ms) and press DEL/SET to confirm.
9. Set Pause Time
After set up the FLASH TIME, press DEL/SET to enter the PAUSE TIME
setup. Press CLID or to select the pause time(1.2s, 2.4s, 3.6s) and press
DEL/SET to confirm.
7
8
FUNCTION SETUP
OPERATION
TELEPHONE
1.Make a Call:
Pick up the handset or press to get dial tone and dial the number.
Use DEL/SET to edit the number.When the called party answers the phone,
the LCD will time the call automatically.
2.Answer the Call:
Pick up the handset or press to answer the call.
3.End a Call:
Hang up the handset or press to end the call.
4.Switch Talk Mode from Handset to Speakerphone:
Press and then hang up the handset to talk through the speakerphone.
5.Switch Talk Mode from Speakerphone to handset:
Pick up the handset and the talk mode will switch to handset automatically.
6.Hold:
In talk mode, press HOLD and the call will be held. The handset can be
hung up.
7.Hold Release:
Pick up the handset, press or press the HOLD button again to release a
call.
8.Flash:
This function is mainly for PBX systems. If you have call waiting service
from your telephone company, it will also work for call waiting service.
a. Press FLASH for call waiting service from your telephone company.
b. Press FLASH to transfer the line to another extension if the phone runs on
a PBX system.
9.Pre-dial:
In on-hook status, dial the phone number and then pick up the handset, The
number will be dialed automatically.
10.Pause:
Press REDIAL/PAUSE for a break off of 1.2/2.4/3.6 seconds.
