Kingston Technology DataTraveler Locker+ G3, Руководство по установке

Страница: 11 / 313

Document No. 480G3001-001.A04 DataTraveler
®
G3 USB-to-Cloud Page 10 of 24
(Continued … ) USB ß à Cloud Initialization (PC Only)
Once the installation has completed, you will see an
application box with a list of options to choose from (for
syncing your Dat G3 data.)
Select the cloud option you wish to use as your backup
application and provide the necessary credentials required
for authentication.
(Note: If you currently do not have an account set up with
any of the cloud options listed, you may create one at this
time, using your favorite Internet browser, and then
completing this option afterwards.)
Once you’ve chosen a cloud option and authenticated to
the corresponding service, the USB-to-Cloud program will
perform an initial comparison of the data partition against
what is stored in the Cloud. As long as the USB-to-Cloud
service is running in Task Manager, content written to the
data partition will automatically back up (sync) to the Cloud.
Figure 3.9 – Cloud Options
USB-to-Cloud Usage
The USB-to-Cloud application provides the following
additional services:
•
Pause Backup (Pauses a data backup)
•
Restore (Restores data from the cloud to the device)
•
Settings (Additional options for your data backup)
•
Exit (Exits the USB-to-Cloud service)
In the ‘Settings’ menu, you can 1) change which cloud
service app you are currently using for backups; 2) change
the language you are currently using; 3) select which files
and/or folders you are backing up to the cloud; 4) enable
or disable Antivirus on the DTL+ G3; 5) check for software
updates; or 6) reset the USB device.
(
Note: If you reset (or format) the DTL+ G3, all data on the
device will be lost. However, whatever data is stored in
the cloud remains safe and intact.
)
Figure 3.10 - Settings