Kingston Technology DataTraveler 4000 G2, Руководство пользователя

Страница: 22 / 405

Document No. 48000127-001.A04 DataTraveler
®
4000 G2 Page 21 of 27
Device Initialisation (Linux Environment)
Once the DT4000 G2 is connected to your computer and has been recognised by the operating
system, the device will need to be initialised prior to first use. To do so, open the ‘Terminal’ application
(or command-line window) and follow these steps:
(
Note: The screenshots and instructions in this section use the linux32 folder (signifying 32-bit) for
purposes of demonstrating use of the DT4000 G2 device in the Linux OS. If you are using the 64-bit
version of Linux, simply navigate to and use the respective 64-bit folder in place of the 32-bit folder, i.e.
linux64 rather than linux32 .)
1. Change directory to the DT4000 G2
volume by typing the following command
at the terminal prompt (as seen in
Figure
10.2
):
cd /media/DT4000G2/linux/linux32
( Note: Commands and folder (directory)
names are case-sensitive, i.e.
‘
linux32’
is NOT the same as ‘Linux32’. Syntax
must also be typed exactly as shown.)
Figure 10.2 – Command-Line Navigation
2. Type
ls (as in l ist) at the current prompt and press ENTER . This will provide you with a list of files
and/or folders in the /media/DT4000G2/linux/linux32 (or linux64 ) folder. You will see five DT4000
G2 commands listed: dt4000g2_about , dt4000g2_forgotpassword , dt4000g2_initialize ,
dt4000g2_login and dt4000g2_logout , as seen in Figure 10.3 .
Figure 10.3 – List of DT4000 G2 Commands
– This section is based on the 64-bit version of Linux –