Kingsman Marquis IDV26, Руководство по установке

Страница: 70 / 110

Leveling Instructions
When installing insert it may be necessary to support back of unit.
IDV26: There are two leveling legs at the back of the appliance. Remove screws and set to proper height. Replace screws.
IDV33 and IDV43:
There are two leveling legs at the front (for Flush Look installations) and two leveling plates at the
back sides of the appliance. Remove screws and set to proper height. Replace screws.
Riser Kit Installation Instructions – Model No.: I33R40 / I33R44
1. Measure height required to make
flush with base of unit (Fig. 1). If
measurement is equal to the height
of riser kit (2.5”), skip to Step 3. No
adjustment will be required.
2. Adjust leveling legs to required
height. See Fig. 3 (Detail A).
3. Locate mounting holes punched
into base right and left of unit. Place
riser assembly under front of insert
and fasten to base with supplied
screws, Fig. 2.
⚠
WARNING: Failure to
position the parts in accordance
with these diagrams or failure to
use only parts specifically
approved with this appliance
may result in property damage
or personal injury.
Front View
Back View
Top View
Right Side
View
Measure Height
Leveling Plate
Leveling Legs
Leveling Legs
Leveling Legs
70