Kingsman IVF36, Руководство по эксплуатации и установке

Страница: 20 / 29

20
CLEANING AND SERVICING OF BURNER/ODS PILOT
It is recommended to annually inspect and clean the unit to prevent malfunction and / or sooting. This operation
should be performed by your dealer or a qualified technician.
Remove log set, handling carefully by holding gently at each end.
(Refer to
Log Placement, page 20.) Gloves are recommended to
prevent skin irritation from ceramic.
Annual Cleaning / Inspection
• Do not use cleaning fluids to clean logs or any part of the heater.
• Use a soft bristle brush or a vacuum with brush attachment.
• Vacuum loose particles and dust from burner ports, valve and
blower compartments.
• Vacuum any accumulation of lint from primary mixing tube.
• Inspect ODS pilot for operation, accumulation of lint at the air inlet
holes.
• Verify flame pattern and log placement for proper operation.
• Verify that all ports ignite and cross over smoothly from rear
to front burner.
FIGURE 11 – Millivolt Pilot Flames
FIGURE 12 – Millivolt Models
WARNING
Turn off heater and allow to cool before cleaning. Only
a qualified service technician should service and repair
appliance.