STEP-IV
Secure the LEFT and RIGHT END FRAMES to
the FRONT and BACK SEAT RAILS with the
knock-down bolts provided. Tighten the bolts
with a proper screw driver.
STEP-V
Using a hammer, drive the dowels into position
as shown in the diagram. Hammer dowels into
respective joints, making sure not to hit other
parts of the chair. To avoid dimpling the wood,
we suggest that you place a block of wood
between the dowel and the hammer head for the
last few blows.
DO NOT FORCE DOWELS
.
If the dowels are not completely flush, you can use a saw to cut the ends and then the
sanding block to smooth the tops.
STEP-VI
Insert the brass screws into their respective pre-drilled holes on the
underside of the SEAT (see assembly diagram).Please use a proper
screw driver.
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE
DEALER NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU
FOR CHOOSING OUR FURNITURE.
* KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
7200 Gateway Court, Manassas, Virginia 20109
Phone 703-361-7000, Fax. 703-361-7001
