‘Orion Range’
Infra-red Motion Sensor - Ceiling Mounted
Model: OD
105
Detection from
Above
Poor Sensitivity
FIELD OF DETECTION
Important Safety Instructions
•
Please read these instructions carefully before installation and keep safe for future reference.
IMPORTANT
This product should be installed by a competent person and in accordance with the current
IET Wiring Regulations and Building Regulations.
If in doubt,consult a qualified electrician
.
•
Always turn off the mains supply before commencing work.
As the detector responds to changes in temperature, avoid the following situations:-
•
Avoid pointing the detector towards objects with highly reflective surfaces, such as mirrors
etc.
•
Avoid mounting the detector near heat sources, such as heating vents, air conditioning
units, lights etc.
•
Avoid pointing the detector towards objects that may move in the wind, such as curtains,
tall plants etc.
1
.
Decide on mounting position of sensor in ceiling, and cut a
65
mm hole, (ensure there is no
wiring/gas/water services directly behind the screws) Dia:
1
.
Switch the mains supply OFF first to prevent electric shock.
INSTALLATION
Good Sensitivity
Dia:
1
This product uses an infra-red heat detector. The detector senses ‘warmth movement’ in the
surrounding area when it is dark. When movement is detected the sensor is activated and
triggers the connected load. It has a built in photo-cell that can identify day and night.
OD105 Ins.qxp_GU10 20/11/2015 12:19 Page 1
