Is
s
u
e
N
o
:
7
0
3
7
6
6
GUARANTEE
TROUBLE SHOOTING
3
b.
ILLUMINATING BUTTON INSERTS
(DPL
12
A-C & DPL
13
A-C ONLY)
4
. USING A TRANSFORMER
If the doorchime does not work, check
the batteries and also that the bell
wire is connected to the correct
terminals. Do not use terminal
marked B.
Your KingShield Doorchime & Bell
Pushes are guaranteed for
12
months
from the date of purchase. Please
retain your till receipt as proof of
purchase. This is in addition to your
statutory rights.
PLEASE KEEP THESE
INSTRUCTIONS SAFE FOR
FUTURE REFERENCE
3.
Fix the base to the doorframe
using two of the screws and
fixings provided. Try to position the
door push in an unexposed place
to protect it from bad weather.
4.
Snap the cover back on if
appropriate.
An alternative bell push can be used
with this doorchime, please follow the
instructions on the pack.
Certain bell push models can be
converted to illuminated pushes by
purchasing either a KingShield
DPL
12
A-C or DPL
13
A-C bell push
button separately.
Please Note
:For
illuminated bell pushes, a bell
transformer must be used. KingShield
models - DP
050
A-C, DP
050
AC-C,
DP
080
A-C are all suitable to convert to
illuminated bell pushes.
Simply press the button on the back
through the front panel of the door
push and swap it with the DPL
12
A-C
or DPL
13
A-C button. Wire up a bell
transformer following Step
4
.
For use with an illuminated bell push.
Only an
8
Volt
1
Amp transformer is
recommended, (KingShield Model
DAT
01
A). Please carefully follow the
manufacturer’s instructions - use
terminals C and D on the doorchime
case to connect up the transformer.
Remove the batteries from the
doorchime and ensure the power is
switched off at the mains before
attempting any wiring.
WEST ROAD . HARLOW
ESSEX . CM
20 2
BG . UK
s a l e s @ g r e e n b r o o k . c o . u k
W W W . G R E E N B R O O K . C O . U K
Mar 14.qxp_Layout 1 08/04/2014 12:03 Page 2
