14
GRILL OPERATION CAUTIONS
• Avoid bumping or impacting grill.
• Keep your hands, hair and face away from burning charcoal.
• This grill has an open flame. Be careful of loose hair and clothing during operation. They may
catch fire.
• Use protective gloves when handling this grill or working with fire. Use protective gloves or
long, sturdy fireplace tools when adding wood or charcoal.
• Do not allow anyone to conduct activities around this grill during or following its use until the
unit has cooled. This grill is HOT during operation and remains HOT for a period of time follow-
ing its use.
• Fatty foods like hamburgers can have excess grease that can cause flare ups. When cooking
fatty foods, use caution when opening lid and during cooking to avoid being burned.
• Be careful when removing food from grill. All surfaces are HOT and may cause burns. Use
protective gloves or long, sturdy cooking tools.
• Never use glass, plastic or ceramic cookware on this grill.
• The use of alcohol, prescription or non-prescription drugs may impair the user’s ability to
properly assemble or safely operate this grill.
• Grill lid and body are HOT while in use and during cooling process.
• Do not remove adjustable charcoal pan while ashes and charcoal are HOT.
• Air dampers are HOT while the grill is in use and during cooling; wear protective gloves when
adjusting.
• Never overfill charcoal pan. This can cause serious injury as well as damage the unit.
• Only use charcoal lighting fluid, never use gasoline, alcohol or other highly volatile fluids to
ignite the charcoal. These fluids can explode causing injury or death.
REMINDER:
NEVER OPERATE THIS GRILL UNDER ANY OVERHEAD CONSTRUCTION. MAINTAIN A MINIMUM
DISTANCE OF 10 FEET FROM OVERHEAD CONSTRUCTION, WALLS OR RAILS.
SEE DIAGRAM BELOW.
Wall
Rails
Overhead
Construction
10 feet
10 feet
Tools needed for assembly:
Adjustable Wrench
Phillips Head Screwdriver
STEP 1.
Orient grill body (2) as shown in
Figure A.
Attach front short leg (13) to grill
body end with bolt (A) and hex
flange nut (B).
Note:
Attach only using hardware
shown.
Attach rear short leg (14) with bolt
(A) and hex flange nut (B).
Carefully reposition grill as
shown in Figure B.
STEP 2.
Position front long leg on grill body
end. Attach front shelf (5) with bolt
(A) and hex flange nut (B).
Repeat step for other end of shelf.
Figure B
Figure A
Before assembly read
instructions carefully.
This unit is heavy. Do not
assemble without assistance.
Assemble grill on a clean, flat
surface.
5
