KingsBottle KBU-100DX Скачать руководство пользователя страница 13

www.kingsbottle.com

 

13

MAINTENANCE

CLEANING YOUR WINE COOLER 

BEFORE CLEANING: Turn off the power, unplug the appliance, and remove all items including all the shelves. 

Wash the inside surfaces with warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda 
with a quart of water. 

Wash the shelves with a mild detergent solution. 

Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts. 

Wash the outside cabinet with warm water and a mild liquid detergent. Rinse well and wipe dry with a clean, soft cloth. 

After installation, we recommend that owners apply a thin layer of Olive Oil with a clean rag, to all exposed Stainless Steel areas. 
This should then be polished in and buffed off with another clean rag to a non-oily finish. This process will aid protection against 
dirt and other corrosive contaminants, by providing a temporary food-safe shield. The Olive Oil layer also makes later polishing 
and removal of fingerprints easier. This process should be repeated frequently every 3-4 months. ALL stainless steel can rust; it is 
a myth that stainless steel doesn’t rust. 

POWER FAILURE 

Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of 
times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your 
contents.

 

VACATION TIME  

Short vacations: You may leave the wine cooler operating during vacations of less than three weeks.

Long vacations: If the appliance will not be used for several months, remove all items and turn o

 the appliance. Clean and dry the 

interior thoroughly. To prevent mold growth, leave the door open slightly, blocking it open if necessary.

MOVING YOUR WINE COOLER 

1. Remove all items. 
2. Securely tape down all loose items (shelves) inside your appliance. 
3. Turn the adjustable leg up to the base to avoid damage. 
4. Tape the door shut. 
5. Be sure the appliance stays secure in the upright position during transportation. Also, protect the outside of the appliance with a 

blanket or similar item. 

ENERGY SAVING TIPS 

• The wine cooler should be located in the coolest area of the room, away from heat-producing appliances, and away from direct 

sunlight. Ventilation at the rear also helps a lot with energy usage, to create a positive air flow where possible, although with this 
range they are designed to be fully built in. 

• When you are not using cooler during weekdays etc. it is recommended to set the temp at a higher level, so set at 64°F (18°C ) 

during periods of non-usage, this will not only mean less run time, it will also keep drinks at a temp that won’t get them spoiled. It 
saves energy also which these days are a growing concern for most households. 

• Keep the cooler stocked; an empty cooler will run longer, believe it or not.

0LEASE¬READ¬THE¬USER¬MANUAL¬CAREFULLY¬AND¬STORE¬IN¬A¬HANDY¬

place for later reference. 

The symbols you will see in this booklet have these meanings:

WARNING

6FGQQWK@MJGLBGA?RCQGLDMPK?RGMLAMLACPLGLEWMSPNCPQML?JQ?DCRW

CAUTION

6FGQQWK@MJGLBGA?RCQGLDMPK?RGMLMLFMURM?TMGBB?K?EGLERFC
?NNJG?LAC

TIPS & INFORMATION

6FGQQWK@MJGLBGA?RCQRGNQ?LBGLDMPK?RGML?@MSRSQCMDRFC?NNJG?LAC

ENVIRONMENTAL TIPS

6FGQQWK@MJGLBGA?RCQRGNQ?LBGLDMPK?RGML?@MSRCAMLMKGA?J?LB
CAMJMEGA?JSQCMDRFC?NNJG?LAC

Meanings of symbols used in this manual are shown below:

6FGQQWK@MJGLBGA?RCQLCTCPRMBMRFGQ

6FGQQWK@MJGLBGA?RCQ?JU?WQBMRFGQ

WARNING

s¬¬)F¬PRESSURISED¬AEROSOL¬CONTAINERS¬BEAR¬THE¬WORD¬

‘flammable’ and/or a small flame symbol,  

do not store them inside any refrigerator or  

freezer. If you do so you may cause an explosion.

s¬¬7HEN¬YOU¬DISPOSE¬OF¬YOUR¬OLD¬REFRIGERATORS¬AND¬FREEZERS¬

remove any doors. Children can suffocate if they get 

trapped inside. 

s¬¬4HIS¬APPLIANCE¬CONTAINS¬INSULATION¬FORMED¬WITH¬mAMMABLE¬

blowing gases. Avoid safety hazards by carefully 

disposing of this appliance.

WARNING

The refrigerator must be plugged into its own 

dedicated 220-240V, 50Hz AC electrical outlet.
The plug must be accessible when the refrigerator is 

in position.
It is essential the power point is properly earthed to 

ground. Consult a qualified electrician if you are unsure.
Don’t use extension cords or adapter plugs with this 

refrigerator.
If the power cord is damaged, have it replaced by a 

qualified service technician.
Unplug the refrigerator before cleaning it, or changing 

the light bulb to avoid electric shock.
Never unplug the refrigerator by pulling the electrical 

cord as this may damage it. Grip the plug firmly and 

pull straight out.
Choose a location for your refrigerator that isn’t too cold. 

The ambient room temperature should be above 10°C.
Stand your refrigerator in a dry place – avoid areas 

of high moisture or humidity.
Don’t put the refrigerator in frosty or unprotected areas 

like a garage or on the verandah.
Keep the refrigerator out of direct sunlight.
Don’t locate the refrigerator near stoves, fires or heaters.
When installed correctly, your refrigerator should:

 

–  Have adequate space at the back and sides 

for air circulation (refer to page 9).

 

–  Be aligned to the surrounding cupboards.

 

–  Have doors that will self-close from a partially 

open position.

WARNING

4#4'(4+)'4#069#40+0)

This appliance may contain a small quantity of environmentally 

friendly, but flammable, non-synthetic R600a refrigerant:

s¬¬%NSURE¬THAT¬THE¬TUBING¬OF¬THE¬REFRIGERANT¬CIRCUIT¬IS¬NOT¬

damaged during transportation and installation.

s¬4HE¬ROOM¬FOR¬INSTALLING¬APPLIANCE¬MUST¬BE¬AT¬LEAST¬M¬PER¬

8g of refrigerant. The amount of refrigerant charged in the 

appliance can be found on the rating plate on the appliance.

s¬+EEP¬VENTILATION¬OPENINGS¬IN¬THE¬APPLIANCE¬ENCLOSURE¬OR¬

in the built-in structure, clear of obstruction.

s¬$O¬NOT¬USE¬MECHANICAL¬DEVICES¬OR¬OTHER¬MEANS¬TO¬

accelerate the defrosting process, other than those 

recommended by the manufacturer. 

s¬4HE¬ROOM¬FOR¬INSTALLING¬APPLIANCE¬MUST¬BE¬AT¬LEAST¬M

3

 

per 8g of refrigerant. The amount of refrigerant charged 

in the appliance can be found on the rating plate on  

the appliance.

+/2146#065#('6;+05647%6+105

5#('6;

PART VI

 

CARE AND MAINTENANCE

!

Содержание KBU-100DX
















Отзывы: