6
Figure 3: Front View
Getting Started
Starting Your Skid Sprayer for the First Time
1.
Ensure all unnecessary personnel are clear of the area.
2.
For initial testing, it is recommended to start with clean water instead of chemicals to
confirm the system and plumbing components are leak free.
3.
Ensure there is fluid in the tank and supply line.
4.
Check line strainer for debris or clogs and remove if any found.
5.
Check all plumbing connections to ensure tightness.
6.
Ensure all valves and regulators are set to the desired setting and working properly.
7.
Ensure all hoses are positioned properly and undamaged.
8.
Follow the next steps on starting the engine.
9.
Set the engine ON/OFF switch to the ON position.
10.
For a cold start, set the choke to FULL.
11.
Check all plumbing connections to ensure tightness.
12.
Ensure all valves and regulators are set to the desired setting and working properly.
13.
Ensure all hoses are positioned properly and undamaged.
Hose reel swivel
150’ high pressure hose
Quick disconnect to
spray gun
