6
V1.1
2.3 OPTION 3: MOUNTING DIRECTLY TO ROOF CROSS BAR OR CANOPY
1. Supplied in the awning kit is two fabricated
mounting brackets and required fasteners.
See
Figure 7.
2. Place the long edge of the supplied mounting
brackets on top of the roof cross bar.
3. Using suitable fasteners, bolt the awning
mounting brackets to the roof cross bars (may
require specific cross bar fasteners) or canopy.
Ensure that the mounting bolts are tight and
secure and that the brackets are suitably spaced
to support the length and weight of the awning.
See Figure 8.
NOTE:
Check the load limit of any roof cross bars or
canopy before mounting the Square Side 270°. Roof
cross bars can vary in design and need their own
specific mounting bolts to suit the cross bar extrusion.
4. Slide the supplied fasteners into the top and
bottom t-slots on the mounting rail. Bolt the
awning to the mounting brackets. Ensure that the
nuts are tight and secure.
See Figure 9.
5. Regularly recheck the nuts and bolts to ensure
they are tight and in good condition.
FIGURE 7
FIGURE 8
FIGURE 9
