5
DRAFT
V1.1
The camera does not come with internal memory. So it will not work without a TF memory card. Before
inserting the TF card into the card slot, The supported memory capacity is up to 128GB. If you use a card
capable of above 128GB, make sure it has been test before putting the camera in use.
2.2 INSERT TF CARD
Switch to the “
SET
” position to enter the Set mode. In this mode you
can take pictures or video clips like a regular digital camera.Or enter
the Menu to set up parameters. On the keypad there are six “shortcut”
functional keys working as shown to the right.
• Press the “
UP
” key to set the camera to shoot video clips.
• Press the “
Down
” key to set the camera to take pictures.
• Press the “
Enter
” key to manually trigger the shutter. A photo or
video (depending on the camera setting) will be taken and saved
to the TF card.
• Press the “
Right
” key to review/playback photos/video on the
LCD screen. Use “
UP
” and “
Down
” key to navigate.
• Press the “
MENU
” key to set up photos and video when review
photos/ videos. You can Delete one/ Delete All/Slide Show/
Protect the photos and videos you want.
2.3 ENTER “SET” MODE
Switch to the ON position to enter the live mode. The Motion Indicator will flash for about 15 seconds and the
camera starts working by itself without any manual handling. lt will at once shoot pictures or record videos
when game or other objects enter the PlR area of the senor. If the game roams away after entering the PlR
area of the sensor, the camera will power off and enter standby mode.
NOTE: ln general, you are recommended to place the camera 3 to 6 feet (1 to 2 meters) above the
ground.
To avoid potential false triggers due to temperature and motion disturbances, please do not aim the
camera at a heat source (i.e the sun) or nearby tree branches and limbs. The ideal direction to aim
at is North or South. Also, remove any limbs close to the front of the camera.
2.4 ENTER LIVE MODE
