background image

Safety instructions   

A.

 

Important safety instructions!   

Thank you for choose KINGREX PREference pre-amplifier. We sincerely hope you could keep 
the user manual for whole PREference life, it provides you with better protection for 
connected equipment.   
 
Please read this user manual very carefully. It provides safety, installation, and operating 
instructions that will help you derive the overall performance and fully extend the life that 
the PREference has to offer.     
 
Please save this manual! It includes important instructions for the safely use PREference 
and for obtaining factory service should the proper operation of the PREference come into 
question. 
 
Please save or recycle the packaging materials! The PREference’s shipping materials were 
designing with great care to provide protection from transportation related damage. These 
materials are invaluable if you ever have to return the PREference for service. Damage 
sustained during transit is not covered under the warranty. 

 

B.

 

 Safety caution! 

z

 

To reduce the risk of electric shock, disconnect the PREference reserved power supply unit 

from the mains supply before installing the PREference pre-amplifier. Reconnect the 
power cord only after signaling interconnections have been made. 

 

z

 

The following precaution should be observed when working on the power supply unit: 
-Remove watches, rings or other metal objects. 
-Use tools with insulated handles. 
!!! Caution: Risk of electric shock, do not remove cover. No user serviceable parts inside, 
Refer servicing to qualified service personnel. 
!!! Warning: To reduce the risk of fire, replace only with the same type and rating of fuse. 
!!! Warning: To reduce the risk of fire or electric shock, install in temperature and humidity 
controlled indoor area of conductive contaminants. 
 
-To prevent fire or shock hazard, do not expose this appliance to rain or moisture. 
-Do not dispose of in fire to prevent injury or burns. Also do not place the units near the 
heat sources such as radiator, heat registers, stoves, or other devices (including amplifiers) 
that produce heat.   
-Do not disassemble the machine with power on. If you do, you may receive an electric 
shock.  
-Do not let children (or grownups) push anything into holes or slots in the case-this could 
result in harmful electrical shock and could cause damage of the equipment.   

Содержание PREference
















Отзывы: