KingKutter 1.5-DT-XB, Руководство пользователя

Страница: 8 / 20

8
ASSEMBLY INSTRUCTIONS
Your XB - Dump Trailer is shipped fully assembled. Usually shipped with the ball
hitch attached, the clevis hitch is bolted to frame under the front of the dump
bed.
BEFORE OPERATING INSTRUCTIONS
(1) Tighten all loose hardware. Replace any missing hardware. On new trailers,
all hardware must be rechecked after first few hours of use.
(2) Replace any broken or bent parts.
(3) Check Trailer for signs of wear or damage. Replace parts if necessary.
(4) Read the safety section of this manual to be sure of all precautions.
MAINTENANCE
1).
Keep tires inflated to rated PSI (listed on tire) at all times.
2). Before each use check to make sure all safety features are installed and
working properly.
3). Before each use check level of hydraulic fluid in hand pump, fluid should be
half way in sight glass. (USE A GOOD GRADE OF HYDRAULIC FLUID)
4). Periodically check all nuts, bolts,jack, pump and hoses to insure they are
tight and secure.
5). Make sure tailgate is shut and latched.
ATTACHING TO VEHICLE
WARNING
Never stand between
towing vehicle and dump trailer
while backing up
to connect the hitch.
STEP 1
Attach to tractor or towing vehicle's clevis or ball hitch and crank jack up.
STEP 2
If you have model with hoses hook them to tractor hydraulic remote out-
lets.
WARNING
Do not use bare hand to check for leaks. Hydraulic fluid under pres-
sure can penetrate skin and cause poisoning.