Kingkraft Assist Classic Artisan Basin, Руководство пользователя

Страница: 9 / 13

9
Installation & Maintenance
Information
RISK OF SCALDING. Your Assist Classic Basin has been installed as standard with a TMV3 Tap to mini-
mise any risk of scalding. Users must be aware that this is not fail safe.
We recommend that the water temperature is independently verified on every occasion it is used,
BEFORE use. We recommend that a calibrated thermometer should be used.
Contact Kingkraft immediately if the water is too cold or too hot. Do not use the basin until the problem is
corrected.
Certain chemical additives may damage the plastic used for the covers on the basin, especially if they
contain bleach or other corrosives. Use only water, normal soap and approved cleaning agents. If in
doubt, please contact Kingkraft for advice about the suitability of the additives you wish to use.
We recommend that your Kingkraft Classic Basin should be cleaned and disinfected with a non-bleach,
non-abrasive solution such as ‘Chemgene’ which is available to buy from us. See the section on cleaning
below for instructions on how to safely and completely clean your unit. Under no circumstances must
acid bleach based cleaners be used. If such products are used, this will immediately invalidate your
product guarantee.
Do not use pressurised water jets to clean any areas of the basin, including the controls. Do not steam
clean.
Do not attempt maintenance unless the basin is empty.
Check the unit frequently for damage. If you find signs of damage, do not use the basin. Contact Kingkraft
as soon as possible to arrange for service or repair.
Maintenance Information:
• If you find any faults with the unit, ensure they are rectified before the basin is next used.
• Only suitably qualified personnel should perform servicing, We recommend that the Assist Classic product is
serviced annually. Kingkraft are able to carry out this work for you, please contact us for further advice.
• For spare parts please contact Kingkraft.
WARNING.
Do not attempt to modify or repair the basin, it’s components or any of its accessories in any
way, doing so could potentially result in a hazard. Only competent individuals should maintain and repair
the Basin.