●
15
●
●
It’s defaulted to display set temperature when turning on the unit. There is no
display in the remote controller.
Only for the models whose indoor unit has dual-8 display.
When selecting displaying of indoor or outdoor ambient temperature, indoor
temperature indicator displays corresponding temperature and automatically turn
to display set temperature after three or five seconds.
Note:
●
Clock time adopts 24-hour mode.
● The interval between two operation
s can’t exceeds 5s. Otherwise, remote contro-
11
CLOCK button
Press this button to set clock time. " " icon on remote controller will blink. Press
▲
"▲" or " " button within 5s to set clock time. Each pressing of "▲" or " " button,
▲
clock time will increase or decrease 1 minute. If hold "▲" or " " button, 2s later
▲
,
time will change quickly. Release this button when reaching your required time.
10
LIGHT button
Press this button to turn off display light on indoor unit. " " icon on remote
controller disappears. Press this button again to turn on display light. " " icon is
displayed.
Introduction for buttons on remote controller
●
ller will quit setting status. Operation for
TIMER ON/TIMER OFF is the same.
12
TIMER ON /
TIMER OFF button
●
When selecting " " or no display with remote controller, temperature indicator
on indoor unit displays set temperature.
●
When selecting " " with remote controller, temperature indicator on indoor unit
displays indoor ambient temperature.
Note:
When selecting " " with remote controller, temperature indicator on indoor unit
displays outdoor ambient temperature.
● Outdoor temperature display is not available for some models.
At that time, indoor
unit receives " "
signal, while it displays indoor set temperature.
9
WiFi button
● This function is only available for some
models.
When WiFi function is turned on, " WiFi " icon will be displayed on the remote
controller; when WiFi function is turned
off, " WiFi " icon will disappear.
How to turn on WiFi
：
Press " WiFi " button to turn on WiFi function.
How to turn off WiFi
：
Hold " WiFi " button for 5s to turn off WiFi function.
Under off status, press "MODE" and " WiFi " buttons simultaneously for 1s, WiFi
module will restore factory settings.
