Care & maintenance
WARNING!
Always switch the product off, disconnect the product from
the power supply and let the product cool down before performing
inspection, maintenance and cleaning work!
Only perform care and maintenance work according to these instructions!
All further works must be performed by a qualified specialist!
Clean
1. Clean the product with a dry cloth. Use a brush for areas that are hard to reach.
2. In particular clean the roller, blade, switches and air vents after every use with a
cloth and brush.
3. Remove stubborn dirt with high pressure air (max. 3 bar).
4. Check for worn or damaged parts. Replace worn parts as necessary or contact an
authorised service centre for repair before using the product again.
Do not use chemical, alkaline, abrasive or other aggressive detergents or
disinfectants to clean this product as they might be harmful to its surfaces.
Dust extraction outlet
Free the dust extraction outlet (10) from blockages and dust by using a suitable tool
such as a piece of wood or high pressure air.
WARNING!
Never insert your bare fingers into the outlet! Never hold a
finger or any other part of your body in the dust extraction outlet. Always
clean a blocked dust extraction outlet with a suitable tool such as a
wooden stick!
21
