Kingfisher KI021-1, Руководство пользователя

Страница: 10 / 15

4. CALLING
To start a call, press [ F1 ] (CALL). As a result, the Outcoming
Call message shows onscreen, the [ F1 ] button changes its name
to (CANCEL), and the name of the [ F2 ] button disappears. You
can also hear the calling signal in the headset.
If optical signal level is enough for communication, the
receiving device screen shows the
Incoming Call message and
emits the intermittent buzz sound. You can also hear the
incoming call signal in the headset.
To receive an incoming call, press [ F1 ] (CALL) or [ F2 ]
(ANSWER). As a result, on both screens the Talk message
appears, the [ F1 ] button changes its name to (CANCEL), and the
name of the [ F2 ] button disappears. Now you can talk over the
device.
To terminate a call, press [ F1 ] (CANCEL) on any device.
If the two Talk Sets get connected in the VOICE mode, the Talk
message appears on both screens as a result. However, if the
signal becomes too weak, the
No Sync message appears
onscreen. If the signal continues to fade, the Outcoming Call or
Incoming Call message appears onscreen. When the signal
restores to a sufficient level, communication re-establishes
automatically.
Kingfisher International
KI021-1 OPTICAL TALK SET Issue 02 Page 9 of 14