22
EN
Getting
started...
Before you start
TTB2200PRW
by TITAN
> Attach the water hose adaptor (19) on the water inlet (14).
> Attach a suitable water hose (not included) onto the water supply and then
the other end onto the water hose adaptor (19) (Fig. 16).
> Open the water supply.
NOTE:
The adaptor (19) contains filters (19a) to protect the product
against larger particles. Ensure the filters are fixed appropriately in
position. Do not use the water inlet and the adaptor without filter.
WARNING!
Check the voltage! The voltage must comply with the
information on the rating label!
If using an extension cord it must be suitable for outdoor use with
sockets protected against water splashing. Ensure the extension cord
is of the proper size and type for your product (≥ 1.5 mm
2
)!
WARNING!
The electric supply connection shall be made by a qualified
electrician and comply with IEC 60364-1. It is recommended that the
electric supply to this machine should include a residual current device
that will interrupt the supply if the leakage current to earth exceeds 30
mA for 30 ms or a device that will prove the earth circuit.
19a
14
19
Fig. 16
Connection to power supply
> Make sure the on/off switch (5) is in its off position (“0”).
> Connect the plug with a suitable socket.
> Your product is now ready to be used.
Connection to water supply
95817_IM_TTB2200PRW_20200702.indd 22
2020/9/21 下午2:06
