It is also expandable up to 320 cues in Sequencer Firing modes up to 16 receiver
modules controlled by
S
channel on the radio control desk KFE2209/18/2 .
Each mode needs to be set on the receiver module before it is used. The operator can
not switch between modes without returning to the receiver modules. This is a safety
feature to prevent the operator activating a mode accidentally.
The new version with advanced over-loading protection function, it can ensure the
firing systems for long time use.
With the advanced interface and musical fireworks show software, it can be used for
creating a professional musical fireworks show.
Technical date sheet:
Module Size (cm)
22.8 x 14.5 x 6.8
Built-in power (V)
12V Ah Lead Acid
Battery
Unit weight (kg)
1.47
Charging power
DC 15V-250mA
Range (meter)
300-350
Output power
DC 24V
Over-loading
protection
New version- Yes
Test current (mA)
0.8MA
What is included:
1 Piece of individual 20 cue receiver module
2 Pieces of safety keys.
1 Piece of 3x20 channel transmitter.
1 Instruction manual.
1 Piece of charger with DC15V 250mA output power.
What is not included:
Battery for Transmitter.
Charging the system:
The Battery Status Light will only operate when the unit is switched ON and in Fire
mode. However the system will charge even when switched off.
Lead Acid Batteries naturally discharge over time. To keep the battery in good
condition it is recommended the system is charged every 2-3months. Storing the
system in extremely low or high temperatures will shorten the life of the battery.
Firing mode definitions:
Button Description
1-20
Single Fire Mode:
1-20 Fire individual cues.
CONT
Sequence Fire Mode
: Fire the cues in sequence with a set delay
between each cue.
STEP
Step Fire Mode:
Fire the cues sequentially with each successive
button press. Holding STEP down continuously will cause multiple
cues to fire.
ALL
All Fire Mode:
Fire all the cues.
Slide
Switch(1,2,3,4)
Transmitter Address:
Position 1, 2, 3: Select which receiver(s) to control when more
than 1 receiver is used.
Position 4: Should only be set in position 4 when the system is
configured with receivers operating together automatically in
series(one after the other)
Page 3 of 8
Page 3 of 8
Receiver control description:
Button Description
Function Selection
(FIRE, OFF, TEST)
Controls the mode of the receiver. TEST mode tests the cues for
continuity. OFF mode turns the receiver off. Fire mode allows
the system to be programmed and cues to be fried.
Safety Switch (ON,
OFF)
This arms and disarms the system.
Program
Programs the receiver with a new transmitter.
Up-Arrow
Increments the selected delay digit.
Right-Arrow
Sets which delay digit to change AND changes the receiver
operating mode.
Ok / Delete
Enters the current time and operating mode setting / Deletes the
current time setting and resets the operating mode.
Add
Sets 1 of 16 possible receiver address for expansion up to 16
receivers, giving 320cues available in CONT firing modes.
T / M
Different time delay mode: Allow a different time delay to be
set between each cue.
Page 3 of 8
Page 4 of 8
