manualshive.com logo in svg

KingCraft VEC072A, Руководство пользователя и информация о гарантии

Поделиться
Скачать
KingCraft VEC072A Скачать руководство пользователя страница 4

4

INTRODUCTION AND FEATURES

Thank you for selecting the King Craft

®

 Model VEC072A 6/2 Battery Charger. With proper care and use, it

will give you years of dependable service. This model battery charger has a high charge rate of up to 6 amps,

and low charge rate of up to 2 amps. It is intended for charging only 12 volt lead-acid batteries -

maintenance free, conventional automotive, marine deep cycle - that are usually used in cars, trucks, farm

equipment, boats, RVs and SUVs, lawn mowers and garden tractors, motorcycles, personal watercraft,

snowmobiles, ATVs, and various light commercial applications. (See Figure 2.)

• Charges automotive batteries in only 6-8 hours and lawnmower and motorcycle batteries in 3-10 hours.

Three settings, with sliding Voltage charge Rate Switch:
a) 6 amps: 12 volt DC batteries.
b) 2 amps: 12 volt motorcycle, smaller batteries as in lawn mowers, snowmobiles, motorcycles, etc.
c) OFF
• Fully Automatic Operation

• Heavy-duty transformer and rectifier for dependability
• Heavy-duty cables and clamps are corrosion-resistant for better connections
• Connect to side or top-mount battery terminals
• Rugged steel case with baked on finish, plus sturdy carry handle
• Ideal for charging during winter season when the starting performance of vehicle batteries is lowered by

cold or extreme weather conditions.

• UL-Listed

FIGURE 2

WARNING:

• THERE ARE NO USER-SERVICEABLE PARTS IN THIS UNIT. IN THE EVENT OF ANY OPERATING

PROBLEM THAT THE UNIT'S BUILT-IN CIRCUIT PROTECTION CANNOT HANDLE,  

DO NOT

 OPEN THE

UNIT. IT MUST BE RETURNED TO KING CRAFT FOR PROFESSIONAL TESTING AND REPAIR. OPENING
THE UNIT WILL VOID THE MANUFACTURER'S WARRANTY. Contact the King Craft Technical Support
Department at (954) 584-4446 or toll-free at 866-584-5504 for further information.

• Reverse Polarity LED indicaters incorrect polarity connection to battery
• Charge Status shows a 12 volt battery is connected, charging and indicates when charging is complete

1. REVERSE CONNECTION LED

2. CHARGE STATUS LED

3. BATTERY CLAMPS

4. HANDLE

5. CHARGE RATE SWITCH

6. GROUNDED PLUG

4

5

6

3

1

2

REMOVE PROTECTIVE

COVERS FROM SLIDE

SWITCHES BEFORE
FIRST USE

Содержание VEC072A













Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды