KingCraft PITTS S-2B, Инструкция по эксплуатации

Страница: 20 / 28

S-2B
18
42. Canopy locking mechanism assembly.
43. Sand the supplied small balsa block with an opening slot shown in picture A below, sand according
to the small triangle shape template supplied in the pack. Note: Please follow picture B below for the
correct orientation of the balsa blocks curvature surface. Once you have finished sanding the block it
should be a perfect fit with the turtle deck. Then glue the balsa block in between the stringers (Picture C)
of the turtle deck, this will make a platform for the locking mechanism to sit on.
44 Before you make a slot in the turtle deck use a sealing iron or a low heat soldering gun to ensure the
covering film is firmly adhered around the area of the balsa block.
(Picture A)
(Picture C)
(Picture B)