KING P 286 Punto, Инструкция по эксплуатации

Страница: 5 / 37

3. Press the ON/OFF button to start the vacuum cleaner.
4. Press the ON/OFF button to switch the vacuum cleaner off after use and before
disconnecting the plug from the mains supply.
5. Rewind the cable by pressing the cable rewind button. It is advisable to guide the
cable with your hand to prevent the cable whipping and damaging the appliance or
other household property. If the cable does not rewind completely, pull the cable out
a small way and press the rewind button again.
MAINTENANCE
To ensure your vacuum cleaner works at optimum efficiency ensure that the dust
container is emptied and the air filters are washed regularly. Switch off and
disconnect from the mains supply before carrying out maintenance.
Emptying the dust container
1. When the dust container reaches the MAX line marked on the dust container or
when the suction power is reduced, it is time to empty the dust container.
2.
Switch off and disconnect from the mains supply.
3. Press the dust container release button and lift off the dust container using the
handle (fig. 6).
4. Position the dust container over a refuse bin, then press the orange button at the
side of the container to open the base (fig. 7) and empty the container. Gently tap
the container against the side of the bin to remove stubborn dust.
Note
■ To raise or lower the brushes on the floor head (fig. 4) press
the floor head lever.
■ When cleaning carpets, raise the brushes on the floor head.
■ When cleaning hard floors, lower the brushes on the floor
head.
■ If using the turbo head to vacuum stubborn objects (e.g. pet
hair), do not touch the rotating brush or use on delicate
surfaces. .
STORAGE
To store the vacuum cleaner tidily when not in use, slide the
storage point on the floor head into the socket at the rear of
the cleaner (fig. 5).